Can i shock my pool with clorox bleach?

You can also simply add more chlorine, and pouring household bleach into the pool is one way to do this. Be sure the pH is in the proper range — between 7.2 and 7.8 — and add the bleach in the early evening to avoid having most of it degraded by sunlight.

Can i switch from chlorine to bromine in hot tub?

Can you switch from chlorine to bromine? You can switch from chlorine to bromine sanitizer in a hot tub. In fact, it is actually easier to go from chlorine to bromine than the other way around.

Can i use clorox pool and spa in my hot tub?

Clorox Spa All-in-One Sanitizer and Shock (For Use in Spas and Hot Tubs)

Can i use a hot tub without chemicals?

So although you cannot run a hot tub without chemicals, you can run a hot tub without the harsh effects of chemicals with Silk Balance. Please note – you must drain your hot tub and flush out the pipes with Clean Start if you are switching your existing water to Silk Balance for the first time.

Can i use baking soda in my hot tub?

Add 1 tablespoon of baking soda to the hot tub for every 100 gallons of water it holds. For example, add 4 tablespoons of baking soda to a hot tub that holds 400 gallons of water.

Can i use baking soda instead of chlorine in my pool?

A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.

Can i use bleach instead of chlorine in my hot tub?

How to shock a spa with bleach? Regular household bleach (non-scented and without additives) can be used in a spa, but the pH level may rise as bleach has a very high pH of 13. For this reason many spa owners may find it easier to use dichlor (chlorine granules) or non-chlorine shock (MPS), which are more pH neutral.

Can i use bleach instead of chlorine?

Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you’ll need to use less bleach to treat your pool.

Can i use bleach instead of shock in my pool?

Using Bleach as a Shock You need to use less of such products per volume than you do if you simply add chlorine, and if you opt for chlorine alone, you need more bleach than you do pool chlorine. Bleach contains the same chemical — sodium hypochlorite — as pool chlorine, but the concentrations are different.

Can i use bleach instead of shock?

At a 12.5% concentrate, liquid pool shock is approximately 2x’s stronger than Clorox bleach. The recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface. When using liquid pool shock, dilute it at a rate of 2.5 to 3 tablespoons per gallon of water.

Can i use bleach to clean my lazy spa?

Bleach destroys molecular chromophore bonds, which are what give the molecules color, which is what stains are. Important: if you are going to use bleach to clean your hot tub, make sure you thoroughly rinse your tub both before and after cleaning and never, ever mix bleach with anything besides water.

Can i use bromine instead of chlorine in my hot tub?

Is bromine OK for a hot tub? An alternative chlorine, bromine can be used to keep hot tub water clean. However, bromine works differently than chlorine and is not the best choice for use with mineral systems. Bromine breaks up the particles in the water by ionizing the water.

Can i use chlorine instead of shock?

SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No. Chlorine sanitizers and shock are similar but different in strength.

Can i use chlorine shock in a bromine pool?

Shocking a bromine pool is done the same way as a normal pool, only you needn’t worry about ‘breakpoint chlorination’. Chlorine shock or non-chlorine shock can be used. An interesting thing happens when you shock a bromine pool. The addition of hypochlorous acid reactivates bromide ions, converting them into bromine.

Can i use hydrogen peroxide in my hot tub?

Although hydrogen peroxide is a strong oxidizer and has disinfection properties, it is not well suited for regular use to treat hot tub water. Hot tubs require a reliable sanitizer that is going to be present in the water when the tub is used by bathers.

Can i use liquid bleach for my pool?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.

Can i use liquid chlorine instead of shock?

The true difference amongst chlorine does not lie in the form it comes in, but rather from being either unstabilized or stabilized. Liquid chlorine and powdered shock have the same active chemical that work to clean your pool, the difference is in the way that you use them.

Can i use magic eraser on hot tub?

Magic Erasers Hot tub owners can use the sponges to clean any grime or build-up on the shell of their hot tubs. You can also gently wipe down the touch screen panels and use it to remove stubborn dirt on the skirting. Use a soft cloth and mild detergent to clean your hot tub cover.

Can i use pool shock in my spa?

Use an oxidizer specifically labeled for use with spas and hot tubs. Do not use pool shock in your spa. It is easy to overdose, and may contain other chemicals not needed in a spa or hot tub.

Can i use salt instead of chlorine in my pool?

Using swimming pool salt instead of chlorine delivers greater swimming comfort: Swimming pool salt does not give off an unpleasant odour as chlorine does. It is much less harsh on hair and skin. It does not cause your eyes to sting.

Can too much chlorine cause cloudy water?

Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.

Can you chlorinate a pool without a pump?

Chlorine keeps a pool clean, clear, sanitized and safe. … While a typical free available chlorine level is recommended at 1-3 parts per million (ppm), without the pump or filter, you should maintain somewhere in the 3-4 ppm range to prevent debris, algae and other problems from potentially developing.